Synthetic parametric model

Introduction

On this page you will find a synthetic parametric model for which one can easily experiment with different system orders $n$, values of the parameter $\epsilon$, as well as different poles and residues.

Also, the decay of the Hankel singular values can be changed indirectly through the parameter $\epsilon$.

Model description

The parameter $\epsilon$ scales the real part of the system poles, that is, $p_i=\epsilon a_i+j{b}_i(j^2=-1)$. For a system in pole-residue form

$H(s,\epsilon )=\sum _{i=1}^n\frac{r_i}{s-p_i}=\sum _{i=1}^n\frac{r_i}{s-(\epsilon a_i+j{b}_i)}$

we can write down the state-space realization

$H(s,\epsilon )=\hat{C}(sI-\epsilon {\hat{A}}_{\epsilon }-{\hat{A}}_0{)}^{-1}\hat{B}+D$

with system matrices defined as

$\epsilon {\hat{A}}_{\epsilon }+{\hat{A}}_0=\epsilon \left[\begin{array}{ccc}{a}_1& & \\ & \ddots & \\ & & a_n\end{array}\right]+\left[\begin{array}{ccc}j{b}_1& & \\ & \ddots & \\ & & j{b}_n\end{array}\right],$

$\hat{B}=[1,\dots ,1{]}^T,\hat{C}=[r_1,\dots ,r_n],D=0.$

Notice that the system matrices have complex entries.

For simplicity, assume that $n$ is even, $n=2k$, and that all system poles are complex and ordered in complex conjugate pairs, i.e.

$p_1=\epsilon a_1+j{b}_1,p_2=\epsilon a_1-j{b}_1,\dots ,p_{n-1}=\epsilon a_k+j{b}_k,p_n=\epsilon a_k-j{b}_k,$

and the residues also form complex conjugate pairs

$r_1=c_1+j{d}_1,r_2=c_1-j{d}_1,\dots ,r_{n-1}=c_k+j{d}_k,r_n=c_k-j{d}_k.$

Then a realization with matrices having real entries is given by

$A_{\epsilon }=\left[\begin{array}{ccc}{A}_{\epsilon ,1}& & \\ & \ddots & \\ & & A_{\epsilon ,k}\end{array}\right],A_0=\left[\begin{array}{ccc}{A}_{0,1}& & \\ & \ddots & \\ & & A_{0,k}\end{array}\right],B=\left[\begin{array}{c}{B}_1\\ ⋮\\ B_k\end{array}\right],C=\left[\begin{array}{ccc}{C}_1& \cdots & C_k\end{array}\right],D=0,$

with $A_{\epsilon ,i}=\left[\begin{array}{cc}{a}_i& 0\\ 0& a_i\end{array}\right]$, $A_{0,i}=\left[\begin{array}{cc}0& b_i\\ -b_i& 0\end{array}\right]$, $B_i=\left[\begin{array}{c}2\\ 0\end{array}\right]$, $C_i=\left[\begin{array}{cc}{c}_i& d_i\end{array}\right]$.

Numerical values

We construct a system of order $n=100$. The numerical values for the different variables are

• $a_i$ equally spaced in $[-10^3,-10]$,

• $b_i$ equally spaced in $[10,10^3]$,

• $c_i=1$,

• $d_i=0$,

• $\epsilon$$\in [1/50,1]$.

In MATLAB, the system matrices are easily formed as follows:

 n = 100;
 a = -linspace(1e1,1e3,n/2).';   b = linspace(1e1,1e3,n/2).';
 c = ones(n/2,1);                d = zeros(n/2,1);
 aa(1:2:n-1,1) = a;              aa(2:2:n,1) = a;
 bb(1:2:n-1,1) = b;              bb(2:2:n-2,1) = 0;
 Ae = spdiags(aa,0,n,n);
 A0 = spdiags([0;bb],1,n,n) + spdiags(-bb,-1,n,n);
 B = 2*sparse(mod([1:n],2)).';
 C(1:2:n-1) = c.';               C(2:2:n) = d.';   C = sparse(C);

The above system matrices $A_{\epsilon },A_0,B,C$ are also available in MatrixMarket format Synth_matrices.tar.gz.

Plots

We plot the frequency response $H(s,\epsilon )=C(sI-\epsilon A_{\epsilon }-A_0{)}^{-1}B$ and poles for parameter values $\epsilon \in [1/50,1/20,1/10,1/5,1/2,1]$.

Frequency response of synthetic parametric system, for parameter values 1/50 (blue), 1/20 (green), 1/10 (red), 1/5 (teal), 1/2 (purple), 1 (yellow).

Poles of synthetic parametric system, for parameter values 1/50 (blue), 1/20 (green), 1/10 (red), 1/5 (teal), 1/2 (purple), 1 (yellow).

In MATLAB, the plots are generated using the following commands:

 r(1:2:n-1,1) = c+1j*d;     r(2:2:n,1) = c-1j*d;
 ep = [1/50; 1/20; 1/10; 1/5; 1/2; 1];                       % parameter epsilon
 jw = 1j*linspace(0,1.2e3,5000).';                           % frequency grid
 for j = 1:length(ep)
   p(:,j) = [ep(j)*a+1j*b; ep(j)*a-1j*b];                    % poles
   [jww,pp] = meshgrid(jw,p(:,j));
   Hjw(j,:) = (r.')*(1./(jww-pp));                           % freq. resp.
 end
 figure,  loglog(imag(jw),abs(Hjw),'LineWidth',2)
          axis tight,    xlim([6 1200])
          xlabel('frequency (rad/sec)')
          ylabel('magnitude')
          title('Frequency response for different \epsilon')
 figure,  plot(real(p),imag(p),'.')
          title('Poles for different \epsilon')

Other interesting plots result for small values of the parameter. For example, for $\epsilon =1/100,1/1000$, the peaks in the frequency response become more pronounced, since the poles move closer to the imaginary axis.

Next, for $\epsilon \in [1/50,1/20,1/10,1/5,1/2,1]$, we also plot the decay of the Hankel singular values. Notice that for small values of the parameter, the decay of the Hankel singular values is very slow.

Hankel singular values of synthetic parametric system, for parameter values 1/50 (blue), 1/20 (green), 1/10 (red), 1/5 (teal), 1/2 (purple), 1 (yellow).

Contact information:

User:Ionita 14:38, 29 November 2011 (UTC)